Analog summing with the MixDream XP brings intense depth, precise localisation and impressive spatiality.
Individual instruments mix with smooth transitions.
Mono For All
All channel pairs can be switched mono, so that two signals can be converted by one D/A chip each.
For this purpose, the signals that are placed in the phantom center of the stereo mix (e.g. kick, snare, lead vocal, bass) are panned hard left/right in the DAW.
The Main Output and the Monitor Output can be made controllable by activating the Variable Output. Then both the recording and the monitor level can be freely adjusted between -14 dB and +7 dB.
If 16 channels are not enough when summing, the expansion input can be used as another stereo input.
The output of another MixDream XP can also be connected here.
Analog inputs & output; XLR & DB25 (balanced)
Maximum input & output gain: 28 dBu
Input impedance: 10 kΩ
Output impedance: 82 Ω
Common mode rejection (1 kHz): 70 dB
Frequency range (-3 dB): 10 Hz – 220 kHz
THD + N (A-weighted, +10 dBu, all channels active): -104 dBu
Noise (A-weighted, all channels active): -97 dBu
Crosstalk (1 kHz, +10dBu): -90 dB
Dynamic range: 125 dB
Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio: +/- 30 V
Operating voltage for relays and LEDs: +12 V
Mains Power Supply
Mains voltage 230 V (selectable): 230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V: T 315 mA
Fuse for 115 V: T 630 mA
Power consumption: max. 36 W
Dimensions & Weight
W x H x D (width x height x depth): 482 x 44 x 237 mm / 19 x 1.73 x 9.33 inch
Unit weight: 3.55 kg / 7.83 lbs
Shipping weight (incl. packaging): 4.9 kg / 10.8 lbs