Phonitor 2 - Störung | Sound Art & Professional Audio Störung | Sound Art & Professional Audio
 

Phonitor 2

The headphone monitoring amp and preamplifier with Phonitor Matrix.
Phonitor 2 is the ultimate headphone amplifier for sound and mastering engineers who also mix and master on headphones. Speakers can also be connected, making Phonitor 2 a full-fledged monitor controller.



1.550,00

Recommended price (21% VAT included)




Milled from the solid
aluminum is the 45mm large volume knob. Its mass in combination with the motorized Alps RK27 “Big Blue” potentiometer further enhances the “spoon in honey” turning feeling.

Remote control
The volume can be adjusted with any infrared remote control, which Phonitor 2 simply learns.
Just press the IR programming button on the back and then the buttons for louder and softer.

Monitor Controller Features
– Sources: 2x XLR, 1x RCA
– Solo L/R
– Phase reversal for L and R
– Output switchable to headphones or speakers
– Mute
– Phonitor Matrix with crossfeed, speaker angle and center level (the latter can be switched off)

To The Power Amp
or to the active loudspeakers it goes symmetrically via XLR sockets.

Slave Thru
The volume control can be switched off by means of a dip-switch on the bottom of the unit.

The Sources
Two balanced and one unbalanced stereo sources can be connected to Phonitor 2.
If a CD player or other HiFi equipment is connected to the RCA jacks, the consumer level can be raised from -10 dBV to 0 dBu using a dip switch on the bottom of the unit. In this way the sources are comparable in level.

Mechanical VU Meter
visualize the input levels, which can be switched in sensitivity with the VU Cal switch.

Laterality
By its very nature, hearing can be directed more to the left or more to the right. This is particularly evident when listening with headphones.
That’s why Phonitor 2 has the finely resolved Laterality control. With it the center can be set perfectly.

Specifications

Analog inputs & outputs; XLR (balanced), RCA
Maximum input & output gain: 32.5 dBu
Input impedance (RCA) 10 kΩ
Input impedance (XLR) 20 kΩ
Output impedance: 75 Ω
Common mode rejection (XLR) -82 dB
Frequency range (-3 dB) 4 Hz – 300 kHz
THD +N (10 Hz – 22 kHz, 0 dBu) 0.00085 %
Noise (A-weighted) -103.8 dB
Crosstalk (1 kHz) -106 dB
Dynamic range: 136.3 dB

Standard Headphones Output, 6.35 mm (1/4″) TRS Jack
Wiring: Tip = Left, Ring = Right, Sleeve = GND
Source impedance: 0,18 Ω
Damping factor (40 ohms) 180
Frequency range (-3dB) 10 Hz – 300 kHz
Crosstalk (1 kHz) -90 dB
THD +N (10 Hz – 22 kHz, 0 dBu) 0.00091 %
Noise (A-weighted) -103 dB
Dynamic range: 135.5 dB
Ausgangsleistung (1 kHz, 1% THD, 600 Ω) 2 x 2,7 W
Ausgangsleistung (1 kHz, 1% THD, 250 Ω) 2 x 5 W
Ausgangsleistung (1 kHz, 1% THD, 32 Ω) 2 x 1 W

Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio: +/- 60 V
Operating voltage for relays and LEDs: +12 V

Mains Power Supply
Mains voltage (selectable, see fuse chamber) 230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V: T 630 mA
Fuse for 115 V: T 1.25 A
Power consumption: max. 40 VA

Dimensions & Weight
W x H x D (width x height incl. feet x depth) 278 x 100 x 300 mm / 11 x 4 x 11,81 inch
Unit weight: 4.3 kg / 9.5 lbs
Shipping weight (incl. packaging) 5.4 kg / 11.9 lbs